One of the fastest
growing companies in America
We offer several mounting options including direct-mounting, hanging or free-standing. You can choose from the following accessories:
Installation with standoffs
You’ll need a screwdriver, a drill, anchors and the standoffs with all included parts for this installation method.
Step 1: Mark the areas for drilling four holes on a flat surface.
Step 2: Drill the holes and insert the anchors.
Step 3: Fasten the cylinders of the standoffs to the anchors.
Step 4: Align the display with pre-drilled holes with the cylinders on the wall.
Step 5: Screw the standoff caps on to sandwich the display between the cylinders and the caps.
Installation with command strips
Command strips are a great option for directly mounting the display onto a wall without visible hardware.
Step 1: Ensure that the application surface is clean and dust-free.
Step 2: Remove one side of the strip and apply it to the back of the item.
Step 3: Make sure the strips are securely attached to the display frame.
Step 4: Peel off the second protective backing and attach to the application area.
Step 5: Grab the base of the display and pull it away from the strips on the wall to detach.
Step 6: Allow the strips to firmly adhere to both surfaces for at least an hour.
Step 7: Apply the display to the wall by reattaching the strips to one another.
Installation with suction cup & hook
A suction cup and hook is an excellent choice for hanging your display on glass.
Step 1: Make sure that the glass is clean and level.
Step 2: Adhere the suction cups to the target location.
Step 3: Hang the display with the hook through the pre-drilled holes.
Installation with easel backs
Easel backs can be used to display small objects on a table or countertop.
Step 1: Fold the wings of the easel back to open the pre-dotted sections.
Step 2: Secure the easel wings in their slots by folding down the circular easel stabilizers.
Step 3: Remove the tape from the adhesive parts of the easel backs.
Step 4: Attach the easel backs to the display from both sides.
Step 5: To make sure they're secure, press and hold firmly for a few seconds.