15% Off Sitewide | 4th of July Savings! Gift Code: 4JULYOFF15
Step 1: Clean the wall before application to make sure there are no dust particles or other debris present. Use a damp cloth to wipe it off and let it dry before you apply the displays. If the wall is damp or dirty, it may decrease the decal’s adhesiveness.
Step 2: Now, take the product and slowly peel a part of the backing paper off and use that as the starting point to apply the decal to the wall.
Step 3: Carefully pass the squeegee (a special tool used for adhesive graphics application but bank cards or other sturdy, flat materials can be used as well) along the applied part of the decal for a firm and even application.
Step 4: Remove the rest of the backing tape as you go. Continue applying the product to the wall while pressing it down and fixing it with the squeegee at the same time to avoid wrinkles and air bubbles.
When the backing paper is completely removed, the adhesive will be firmly fixed onto the wall. Make sure to thoroughly pass over it with the squeegee to get rid of any leftover air bubbles.
If you order wall letters, numbers, or separate graphics, your products will have an additional layer called a transfer paper. The letters are pre-spaced on the transfer paper to make installation easier. Use the same technique to apply these products except at the end, remove the transfer paper to leave your display perfectly pasted onto the wall.