Installation of Gold Acrylic Signs

Below you can find the installation options based on the accessories we offer for gold plexiglass.

Installation With Standoffs

You will need a screwdriver, drill, anchors, and silver or golden standoffs with all included parts.

Step 1: Mark the areas on the wall for drilling holes.

Step 2: Drill the holes and insert the anchors.

Step 3: Screw the barrels of the standoffs onto the anchors.

Step 4: Position the display so that the drilled holes slide over the barrels.

Step 5: Screw the standoff caps on.

Note: Get your product with pre-drilled holes to avoid damaging the material. You can find the drilled holes option in our design tool menu.  

Installation With Command Strips

Get command strips and install the plaques on smooth flat surfaces by following the steps below.

Step 1: Make sure the application area is smooth and level.

Step 2: Peel off the strip from one side and adhere it to the back of the display.

Step 3: Peel off the cover from the second strip and attach the display to the hanging surface.

Step 4: Pull the base of the display outwards until it detaches from the wall strips.

Step 5: Wait for at least an hour so that the strips bind well to their surfaces.

Step 6: Hang the display back up by aligning and reattaching the strips.

Installation With Suction Cup & Hook

A suction cup and hook is used to hang the material from smooth surfaces such as glass.

Step 1: Ensure the surface is clean and level.

Step 2: Stick the suction cups onto the desired area.

Step 3: Pass the hooks through the pre-drilled holes on the product.

Installation With Easel Backs

Use easel backs to display your gold plaques on tables or countertops.

Step 1: Take the easel backs and fold the wings to open the pre-dotted areas.

Step 2: Fold down the circular easel stabilizers and secure easel wings into their slots.

Step 3: Remove the tapes from the adhesive parts of the easel backs.

Step 4: Stick the easel backs onto the back side of the display.

Step 5: Press and hold for a few seconds until they’re securely attached.