10% OFF YOUR FIRST ORDER
Sign Up Now!
Custom floor decals require a simple installation process. Follow the steps below for an easy and seamless application.
Required tools: Squeegee (you can also use a credit card or similar object), scissors, masking tape and a damp cloth.
Before the installation, ensure the surface is clean to avoid air bubbles under the decals. Take the damp towel and thoroughly clean the area of application. Make sure the surface is completely dry. Otherwise, the material may not adhere to the surface properly.
Next, take a measuring tool and find the perfect spot for the installation. Adjust the decal in your desired position and mark the area of application with masking tape. (This is optional as you can install the decal without marking the application area. It just makes the process more precise so no readjustment will be necessary.)
For small floor stickers:
Step 1: Take the floor sticker and peel off the backing paper.
Step 2: Apply the decal with the adhesive part to the floor and flatten it out with your hand.
Step 3: Take the squeegee or a plastic card and pass over the decal to make sure there are no air bubbles underneath.
And you’re done.
For large floor decals:
Step 1: Place the decal in the position where you want to install it.
Step 2: Take masking tape and place a strip down the center of the decal to hold it in place.
Step 3: Take one side of the decal and gently peel off the backing paper. Stop when you reach the center with the masking tape.
Step 4: Take the scissors and cut off the loose backing paper.
Step 5: Apply the exposed part of the decal to the surface and flatten it out with your hand.
Step 6: Once the first half is installed, remove the masking tape that you used to secure the decal in its place.
Step 7: Lift the uninstalled part of the decal and slowly peel off the remaining backing paper.
Step 8: Apply the rest of the decal to the surface using the same technique.
Step 9: Take the squeegee or a plastic card and go over the entire floor decal to get rid of air bubbles.
That’s it, you’re done with the installation.
Download our PDF installation guide which provides step-by-step instructions with images on how to apply custom floor decals. Installation guides are available for all our products. Each guide provides precise information on the hardware and techniques required for application.