Installation of Salon Window Decals

Installation by Dry Mounting

The quickest method for applying smaller-sized adhesive graphics.

Step 1: Clean the window surface.

Step 2: Place the adhesive graphics in the correct position.

Step 3: Fix the top center of the graphics to the window with tape to keep them in place.

Step 4: Remove one part of the protective layer and adhere the exposed section.

Step 5: Remove the rest of the protective layer and attach the remaining part of the graphics.

Step 6: Use a squeegee or plastic card to remove air bubbles from underneath the product and smooth it out by moving from the center to the edges.

Installation by Wet Mounting

This method allows you to reposition the graphics during the installation if needed. It only applies to clear products.

Step 1: Wash and dry the window surface to get rid of any dust and debris.

Step 2: Spray a dish soap and water mixture on the window surface to help reposition the graphics.

Step 3: Remove the protective layer and spray dish soap water on the adhesive side of the graphics.

Step 4: Apply the graphics to the wet window, starting from the top and moving down.

Step 5: Use a squeegee or plastic card to get rid of excess water and air bubbles, moving outwards from the center.

Step 6: Dry the excess water with a soft cloth for a final application.