10% OFF YOUR FIRST ORDER
Sign Up Now!
We recommend getting the display with pre-drilled holes if you’re thinking about installing your displays with suction cup and hook or standoffs. Select the option from our design tool menu while placing your order.
Installation With Command Strips
Command strips are the best option for direct mounting without visible hardware.
Step 1: Remove the cover from the adhesive part on one side of the strips.
Step 2: Apply the strips with the exposed adhesives to the back of your display.
Step 3: Remove the cover from the other side of the adhesives on the strips.
Step 4: Attach your display to the wall by pressing the areas with strips against it.
Step 5: Grab the base of the display and gently pull it away from the wall.
Step 6: Unbind the command stips from each other and set the product aside.
Step 6: Allow the strips to bind to their respective surfaces for at least one hour.
Step 7: Attach your display back onto the surface by reattaching the strips.
Removal of Command Strips
Command strips can be easily removed without leaving any residue behind. They lose adhesive property and are not reusable after you peel them off.
Step 1: Grab the bottom corners of the display and pull away from the wall to detach.
Step 2: Pull the tab of the adhesive strips off the wall until they come off.
Installation With Suction Cup & Hook
This installation option is perfect for hanging your display from glass or other smooth surfaces.
Step 1: Make sure the glass surface is smooth, clean and level.
Step 2: Stick the suction cups by pressing them to the application area.
Step 3: Hang the display by passing the hooks through the pre-drilled holes.
Installation With Standoffs
Get gold or silver colored standoffs for a classy wall mount. You’ll need a screwdriver, drill, anchors, measuring tape, leveler and the standoffs with all included parts for the installation. You can get your product with pre-drilled holes from our menu.
Step 1: Choose a flat level surface where you want to install the display.
Step 2: Mark the spots where you want to drill holes.
Step 3: Drill holes on the marks and insert anchors.
Step 4: Screw the standoff barrels onto the anchors.
Step 5: Align the pre-drilled holes on the product with the standoff barrels.
Step 6: Slide the pre-drilled holes on the product over the barrels.
Step 7: Screw the standoff caps onto the barrels.
Step 8: The display should be firmly sandwiched between the barrels and the caps.