10% OFF YOUR FIRST ORDER
Sign Up Now!
You can install custom wooden signs in your desired location with multiple accessories. We offer the following types of installation hardware for custom wooden signs: standoffs, command strips, zip ties and easel backs.
Step 1: Use a leveler to ensure that the wooden panel is positioned straight.
Step 2: Mark the wall using the pre-drilled holes of the sign.
Step 3: Drill holes into the wall accordingly.
Step 4: Insert wall anchors into the drilled holes.
Step 5: Screw the standoff barrels onto the anchors.
Step 6: Align the holes on the sign with the barrels to secure the standoff caps.
Step 1: Take a pair of command strips and snap them onto each other.
Step 2: Peel off the tapes on one side and apply to the upper edges of the wooden sign.
Step 3: Remove the second adhesive layers and apply the sign to the target area.
Step 4: Unsnap the wooden sign, leaving the other strip attached to the wall.
Step 5: Press the wall strips down for 30 seconds to ensure they are firmly attached.
Step 6: Leave them to set for an hour to get the tightest grip possible.
Step 7: Fix the sign back onto the wall by reattaching the strips.
Step 1: Take zip ties according to the numbers of pre-drilled holes on the sign.
Step 2: Pass the zip ties through the holes on the sign.
Step 3: Secure the sign into place with the zip ties, leaving no wiggle room.
Step 4: Cut the extra edges of the zip ties off for a neater look.
Step 1: Take the easel backs and fold the wings to open the pre-dotted areas.
Step 2: Fold down the circular easel stabilizers to secure the wings into their slots.
Step 3: Remove the tapes from the adhesive parts of the easel backs.
Step 4: Fix the adhesive parts of the easel backs onto the edges of the sign.
Step 5: Press for a few seconds to make sure they are securely attached.
Step 6: Stabilize the sign with the easel backs on a flat surface.