Installation Of Truck Decals

Dry Mounting

This method is for quick installation. Once the product is attached, you can’t reposition it, so make sure you follow these directions.

Step 1: Clean the application surface of any debris.

Step 2: Place the adhesive graphics in the correct position.

Step 3: Fix the product with tape at the top and sides if needed to keep it in place.

Step 4: Remove one part of the backing paper and adhere the exposed material.

Step 5: Remove the rest and adhere the remaining part of the adhesive material.

Step 6: Use a squeegee or plastic card to get rid of any air bubbles.

Step 7: Work from top to bottom and center to sides to smooth out the sticker.

Wet Mounting

The wet-mounting method provides the most accurate results as it allows you to reposition the adhesive graphics during installation.

Step 1: Wash and dry the surface to get rid of any dust and debris.

Step 2: Spray dish soap water on the truck to reposition the product if needed.

Step 3: Remove the backing paper and spray dish soap water on the adhesive side.

Step 4: Apply it to the wet truck surface, starting from the top and moving down.

Step 5: Use a squeegee or plastic card to remove any water and air bubbles. 

Step 6: Work your way from the center to the edges to smooth out the material.

Step 7: Use a soft cloth to dry the remaining water for a final application.