Refer a friend and get $50 when they make a purchase.
Please or to refer a friend.
Installation by Dry Mounting
Step 1: Clean the application surface before applying the product.
Step 2: Place the adhesive graphics in their correct position.
Step 3: Tape the product at the top and sides if needed to keep it in place.
Step 4: Remove one part of the backing paper and adhere the exposed section.
Step 5: Remove the rest of the backing paper.
Step 6: Adhere the remaining part of the material.
Step 7: Use a squeegee or plastic card to remove any air bubbles.
Step 8: Work from top to bottom and center to sides to smooth out the material.
Installation by Wet Mounting
Step 1: Wash and dry the window to get rid of any dust and debris.
Step 2: Spray dish soap water on the window to help reposition the product if needed.
Step 3: Remove the backing paper and spray dish soap water on the adhesive side.
Step 4: Apply it to the wet window, starting from the top and moving down.
Step 5: Use a squeegee or plastic card to remove excess water and air bubbles.
Step 6: Work your way from the center to the edges to smooth out the material.
Step 7: Use a soft cloth to dry the remaining water for a final application.