Installation of Truck Window Decals

Dry Mounting

Use this method to apply the adhesive graphics onto glass surfaces. Keep in mind that you can’t reposition the product if you use this method.

Step 1: Clean the application surface before applying the product.

Step 2: Place the graphics in the correct position.

Step 3: Remove one part of the backing paper and adhere the exposed section.

Step 4: Remove the rest of the backing and adhere the remaining part of the sticker.

Step 5: Use a squeegee or plastic card to remove any air bubbles.

Step 6: Work your way from top to bottom and center to sides to smooth out the material.

Installation by Wet Mounting

This method allows you to reposition the product during the installation process if needed.

Step 1: Wash and dry the glass to get rid of any dust and debris.

Step 2: Spray dish soap water on the application area to help reposition the product if needed.

Step 3: Remove the backing paper and spray dish soap water on the sticky side of the product.

Step 4: Apply the adhesive to the wet glass, starting from the top and moving down.

Step 5: Use a squeegee or plastic card to remove any water and air bubbles. 

Step 6: Work your way from the center to the edges to smooth out the material.

Step 7: Use a soft cloth to dry off the remaining water for a final application.