FREE SHIPPING ON ORDERS OVER $85
Eligible for ground shipping within the contiguous US. Excludes products over 36”.
This method is for quick installation. Once the product is attached, you won’t be able to reposition it, so make sure you follow these directions.
Step 1: Clean the application surface of any debris.
Step 2: Place the adhesive in the correct position.
Step 3: Fix the product with tape at the top and sides if needed to keep it in place.
Step 4: Remove one part of the backing paper and adhere the exposed material.
Step 5: Remove the rest and adhere the remaining part of the product material.
Step 6: Use a squeegee or plastic card to get rid of any air bubbles.
Step 7: Work from top to bottom and center to sides to smooth out the product.
The wet-mounting method provides the most accurate results as it allows you to reposition the product during installation.
Step 1: Wash and dry the surface to get rid of any dust and debris.
Step 2: Spray dish soap water on the application area to reposition the product if needed.
Step 3: Remove the backing paper and spray dish soap water on the adhesive side.
Step 4: Apply it to the wet trailer surface, starting from the top and moving down.
Step 5: Use a squeegee or plastic card to remove any water and air bubbles.
Step 6: Work your way from the center to the edges to smooth out the material.
Step 7: Use a soft cloth to dry the remaining water for a final application.