Installation of Opaque Car Decals

Dry Mounting

This is the quickest installation method. Note that with dry mounting, you won’t be able to reposition the decal once attached. 

Step 1: Clean the application surface and dry it off completely.

Step 2: Remove the transfer paper from the decal and position it in the correct place.

Step 3: Apply the decal starting from one side by evening it out with your hand.

Step 4: Squeegee the decal to get rid of all the air bubbles underneath the surface. 

Step 5: To flatten smaller-sized stickers, you may use a plastic card as an alternative.

 

Wet Mounting

The wet-mounting method provides the most accurate results and allows you to reposition the sticker during the application process.

Step 1: Clean the application surface and make sure it’s smooth and dry.

Step 2: Spray it with soapy water to help you reposition the decal if needed.

Step 3: Peel the transfer paper off the decal and spray soapy water onto its sticky side.

Step 4: Adhere the sticker to the application surface of the vehicle. 

Step 5: Use a squeegee or plastic card to get rid of air bubbles and flatten it out. 

Step 6: Start from the middle and work your way out towards the edges.

Step 7: When satisfied with the application, dry the sticker for final adhesion.

 

Removal

Remove the decal by peeling it off starting from one corner. When finished, clean the surface with a damp cloth to get rid of any residue.