Installation of Styrene Posters

Installation With Command Strips

Command strips are the best option for direct mounting without visible hardware.

Step 1: Remove the cover from the adhesive part on one side of the strips.

Step 2: Apply the strips with the exposed adhesives to the back of your display.

Step 3: Remove the cover from the other side of the adhesives on the strips.

Step 4: Attach your display to the wall by pressing the areas with strips against it.

Step 5: Grab the base of the display and gently pull it away from the wall.

Step 6: Unbind the command stips from each other and set the product aside.

Step 6: Allow the strips to bind to their respective surfaces for at least one hour.

Step 7: Attach your display back onto the surface by reattaching the strips.

Removal of Command Strips

Command strips can be easily removed without leaving any residue behind. They lose adhesive property and are not reusable after you peel them off.

Step 1: Grab the bottom corners of the display and pull away from the wall to detach.

Step 2: Pull the tab of the adhesive strips off the wall until they come off.

Installation With Suction Cup & Hook

The suction cup and hook is an ideal option to hang your display from glass or other smooth surfaces.

Step 1: Choose a clean, dust-free and smooth surface.

Step 2: Stick the suction cups by pressing them to the application area.

Step 3: Pass the hooks through the pre-drilled holes on your display.

Installation With Zip Ties

Ideal for a hanging installation of displays that have grommets. You can select them as an option from our design menu. 

Step 1: Choose the number of zip ties according to the number of grommets.

Step 2: Pass the zip ties through the grommets.

Step 3: Attach the zip ties to the installation area.

Step 4: Tighten all the zip ties for a firm grip.

Step 5: Cut off all the extra ends of the zip ties for a clean look.