One of the fastest
growing companies in America
We offer five different accessories for the installation of this product. It can be mounted on stakes or hung using zip ties, grommets and command strips.
H-stake signs are ideal for windy weather as they get firmly rooted in the ground. Choose an area with soft dirt to insert the stake without the need for additional tools.
Step 1: Mark the place on the ground where you want to position the sign.
Step 2: Draw the two wires through the corrugated flutes.
Step 3: Fix the bottom of the sign into the ground.
Check the firmness of the soil and choose ground that’s not too hard or too brittle. The poles should easily press into soft dirt without the need for any additional tools.
Step 1: Find a flat surface for the stake installation.
Step 2: Carefully slide the sign onto the stake.
Step 3: Push the bottom of the spider stake into the soil.
We offer grommets for hanging installation. We’ll fix the grommets onto the corners of the sign to streamline the process for you. You can insert zip ties, bungees, nylon ropes, hanging clips or any other hardware you prefer through the grommet holes.
Step 1: Take your sign with the pre-fixed grommets.
Step 2: Pass the hanging hardware of your choice through each grommet hole.
Step 3: Pass the hardware through the target location.
Step 4: Fix it firmly into place per hardware requirements.
You may also use zip ties to hang up your corrugated displays. Choose the grommet option for a clean look or pierce holes into the sign as you see fit. Make sure to leave enough space around the edges to prevent the material from ripping or cracking.
Step 1: Make sure that the application surface is level.
Step 2: Pass the zip ties through the holes on the sign.
Step 3: Fasten the sign to the target location.
Step 4: Secure the zip ties.
Step 5: Cut the extra parts of the ties for a neater look.
This is the best accessory for hanging your sign from the wall without any visible installation hardware.
Step 1: Clean the surface before attaching the sign to it.
Step 2: Peel off the strip backing from one side to adhere it to the sign.
Step 3: Make sure the strips are firmly attached to the sign.
Step 4: Peel off the protective backing to apply the sign to the wall.
Step 5: Detach the sign from the wall by holding it from the bottom corners.
Step 6: Wait for at least an hour for the command strips to adhere to the wall.
Step 7: Apply the sign back to the wall by reattaching the strips.