*Ground shipping only. Certain limits apply based on product and size.
Fabric banner installation process with a bungee cord
Step 1: Make sure you have sturdy hanging hardware.
Step 2: Adjust in place from top cornerer with the bungee.
Step 3: Connect the bottom grommets to the hardware with the bungee.
Fabric banner installation process with nylon ropes
Step 1: Run the rope through the grommets.
Step 2: Connect the top corners of the fabric banner to the attachment point.
Step 3: Make sure it is level and fix the bottom corners.
Step 4: Cut the unnecessary parts of the rope.
Fabric banner installation process with zip ties
Step 1: Wrap the zip tie with clips looking outwards and through the grommets.
Step 2: Check if its level and snap the zip ties firmly to the construction.
Step 3: Cut all extra parts of the zip tie for a clean look and finish.
Fabric banner installation process with pole pockets
Step 1: Open up pole pockets using your fingers.
Step 2: Insert the fabric banner through the top bar of the hanging hardware.
Step 3: Put the pole through the bottom pocket and fix it to the construction.